Skip Ribbon Commands
Skip to main content
Sign In
T-SEAL Mobile
Save Time With This Versatile Handheld Tubing Sealer

Create dependable tubing seals quickly and easily, wherever you need them, at the donor chair and beyond.

  • Compact design slips easily into your lab coat pocket
  • Intelligent sensor automatically adjusts the sealing process based on the tubing material and diameter
  • Device displays sealing status, so you know when your seal is complete
  • Delivers approximately 1,500 seals per charge
  • Device fully charges in about three hours
  • Designed for use with polyvinyl chloride (PVC) and ethyl vinyl acetate (EVA) tubing
  • Accommodates PVC tubing up to 6.2 mm (0.24 in) outer diameter and EVA tubing up to 5.4 mm (0.21 in) outer diameter
How It Works
Create dependable tubing seals on the go in just a few steps
  1. Place the tubing in the slot of the T-SEAL Mobile.
  2. Check that the tubing is positioned between the electrodes in the slot.
  3. Squeeze the trigger to bring the two electrodes closer together until the orange seal indicator light is no longer illuminated.
  4. When the seal indicator light goes out, the sealing process is complete.
  5. Remove the tubing and separate the two sides of the seal by pulling on both sides of the tube.


T-SEAL Mobile is available in select markets.

​​​​​​